Introduction and Overview

 Top  Next

 

logo_100x100px_72dpi_test

BurnInTest is a software tool that allows all the major sub-systems of a computer to be simultaneously tested for reliability and stability. Anyone who has used computers for any period of time knows the importance of having a stable system. The cost of a hardware failure can be enormous.
 
If you are lucky your data will only become inaccessible while faulty components are replaced. If you’re unlucky you can lose your files completely or have them permanently corrupted. Even if you have good backups, you can still lose days of work returning the PC to its pre-failure state.
 
In many cases the lost data can never be replaced and businesses can be brought to their knees, with the loss of documentation, customer details and financial records.

 

BurnInTest thoroughly exercises the hardware in a PC in a short period of time, in the same way as normal applications use a PC over a long period of time. This takes advantage of the fact that computer hardware tends to fail either very early in its life or after many thousands of hours of use.

 

Typically BurnInTest should be used before a PC is put into service, as a failure of a computer that isn't being used for a critical application and doesn't have any critical data is much less damaging, (especially if it is still under warranty).

 

BurnInTest will bring to the surface intermittent or hidden problems so that after a successfully run the computer can be used with a much higher level of confidence.

 

BurnInTest tests,

•The CPU via mathematical operations

•Hard drives / Floppy drive

•CD ROM and DVD

•2D graphics

•3D graphics

•Memory & Network connection

•Serial ports

•USB ports

•Parallel ports with loop back connectors

All these tests can be done simultaneously as the application is multithreaded.

 

You can use BurnInTest to,

•Avoid delivering D.O.A. (Dead on Arrival) hardware to your customers.

•Dramatically reduce your burn in times with multithreaded simultaneous testing of components.

•Build your image as a supplier of quality systems.

•Avoid costly downtime, system rebuilds and lost data.

•Test the stability of a system after configuration changes or hardware upgrades (critical for over clocking).

 

For more information.

To get started quickly see the Quick start page

See Interpreting the results for information of BurnInTest controls and different views

See Test Descriptions for information about each test

Have a look at what each menu option does

Find out how to purchase the software