## Test config file for BurnInTest Linux command line version
## Use '#' to comment out lines, remove the comment to enable an option
## Double ## have been used for explanations of each section/paramter
## Single # have been used to comment out optional paramters/tests

## Note that only 14 lines of tests can be displayed on the main window
## due to console size limits

## Logging 
## Comment out the section to turn logging off
<Logging>

## Location (path) of log file
LogFilename /tmp/

## Log prefix
LogPrefix BiTLog2
## Format - Ascii|HTML|Certificate
Format Ascii
## Logging detail level - summary|normal
LogDetailLevel normal
## Trace level - None (0) | Activity Trace 1 (1)| Activity Trace 2 (2) 
TraceLevel 0
##maximum number of lines for file
MaxFileLines 1000		
## Logging mode - single file or multiples with timestamp
##   - ClearAppend Clear results & append (single file)
##   - AccumulateAppend Clear results & append (single file)
##   - ClearNew Clear results and overwrite existing (single file) 
##		- Timestamp Create new timestamped files (multiple files)
LogMode ClearAppend

</Logging>

## Pre Test Action
#<PreTest>
##Action before tests start - None, Warn and ExternalWait - currently only None and ExternalWait are valid
#Action 
##If using ExternalWait this is the path of the file or script to launch and wait for the end of it's execution
#ExternalPath /path/to/file
#</PreTest>

## Post Test Action 
#<PostTest>

##Auto stop action when tests have passed Stop, RunApp, Reboot
#AutoStopPassed Stop
##Manual stop action when tests have passed Stop, RunApp
#ManualStopPassed Stop
##If using AutoStopPassed RunApp this is the path of the file or script to launch before exiting
#ExternalPathPassed /path/to/file
##If using AutoStopPassed RunApp this is the paramters to pass to the application being launched
#ExternalParmasPassed paramters
#UseSystemBeepPassed
#DisplayResultsPassed

##Auto stop action when tests have failed Stop, RunApp, Reboot
#AutoStopFailed Stop
##Manual stop action when tests have failed Stop, RunApp
#ManualStopFailed Stop
##If using AutoStopPassed RunApp this is the path of the file or script to launch before exiting
#ExternalPathFailed /path/to/file
##If using AutoStopPassed RunApp this is the paramters to pass to the application being launched
#ExternalParmasFailed paramters
#UseSystemBeepFailed
#DisplayResultsFailed

#</PostTest>

#<Notes>
## CustomerName
#CustomerName Name
## TechnicianName
#TechnicianName Name
## MachineType - One line description of the machine type
#MachineType Type
## MachineSerial - Custom serial for this machine
#MachineSerial Serial1234
## MachineID - Management console machine ID. Needs to be a minimum of 8 characters, maximum of 15
#MachineID Test1234
## Notes - Ones line description of extra notes
#Notes One line of notes
#</Notes>

## Duty cycles
<DutyCycles>
## Auto stop after XXX minutes
AutoStopMinutes 15
## Auto stop after XXX cycles
AutoStopCycles 0
## Duty cycle load for each test, 1-100
CPU 100
CDDVD 100
Memory 100
Serial 100
Parallel 100
Disk 100
Network 100
USB 100
Sound 100
PCIE 100
</DutyCycles>

## Memory section
<Memory>
#Test pattern - Cycle, Sequence, Binary1, Binary2, Zeros, Ones
Cycle
</Memory>

## Disk section - Have a <Test> section for each device to test
<Disk>

## Global disk test settings

##TestAllDisks - Test all detected partitions, uncomment to use
#TestAllDisks

##TestAllRAWDisks - Test all detected RAW (unpartitioned) disks, uncomment to use
#TestAllRAWDisks

##When using Test all  - File size as % of disk space 1-15%
#FileSize 1

##When using Test all - Cyclic, Sequential, HighLow, Binary1, Binary2, Zeros, Ones, Random, RandomSeeking
#TestMode Cyclic

## Individual disk settings
## Test a device
<Test>
## The device to be tested
Device /dev/sda1
## The test mode - Cyclic, Sequential, HighLow, Binary1, Binary2, Zeros, Ones, Random, RandomSeeking
TestMode Cyclic
##File size as % of disk space 1-15%
FileSize 1
## Duty cycle override, 0 - 100
#DutyCycleOverride 0
## Seek count
#SeekCount 100
</Test>
</Disk>

##CPU-Math 
##Comment out the matching test name if you don't want the tests run
<CPU>
##General Operations Test
General
##Floating Point Unit test
FPU
##Extension instructions - SSE
SSE
##Extension instructions - SSE2
SSE2
##Prime Number Test
Prime 
</CPU>

## Network
<Network>

## Have an IP keyword (up to 4) for each destination IP to test. The IP specified should be an address external
## to the system under test that can respond to ping requests.
IP 127.0.0.1

## Bad packet ratio
## - Set to 0 for every bad packet to generate and error
## - Set to a 1-99 range for an error to be generated once the bad packet ratio reaches this level
BadPacketRatio 2
## Timeout - ms time before connection times out, 100 - 200000
TimeOut 2000
## Uncomment TestAllNICs to bind each entered IP to a different network card
#TestAllNICs
</Network>

## CD-RW/DVD - Have a <Test> section for each device to test
#<CDRWDVD>

#<Test>
## Device to test
#Device /dev/hdc
## Test mode - Music CD playback (Music), Data CD Read and Verify (Data), PassMark Test CD/DVD (Passmark), No CD (No)
#TestMode Passmark
## Additional seek - uncomment and edit the seek value if necessary, only valid for PassMark Test CD/DVD 0-1000
#Seek 100
#</Test>


## Device to test
#Device /dev/hdd
## Test mode - Music CD playback (Music), Data CD Read and Verify (Data), PassMark## Test CD/DVD (Passmark), No CD (No)
#TestMode Music
## Additional seek - uncomment and edit the seek value if necessary, only valid for PassMark Test CD/DVD 0-1000
#Seek 100
#</Test>

#</CDRWDVD>

## Serial Port - Have a <Test> section for each device to test
#<Serial>

#<Test>
## Device to test - ttys0, ttys1 etc to ttys63
#Device ttys0
## Test Mode - Loopback or Detect
#TestMode Loopback
#</Test>

#<Test>
## Device to test - ttys0, ttys1 etc to ttys63
#Device ttys1
## Test Mode - Loopback or Detect
#TestMode Detect
#</Test>


## Disable RTS/CTS and DSR/DTR
#DisableRTS
## Send and receive timeout, 100-30000 ms
#SendReceive 3500
## Baud rate - 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 
##            Cycle to 115200 (Cycle115), 230400, Cycle to 230400 (Cycle230), 460800,921600
#BaudRate 115200
#</Serial>

## Parallel Port - Can only test one port at a time
#<Parallel>
## Device to test, lp0, lp1 etc
#Device lp0
## Test Mode - Loopback or Detect
#TestMode Loopback
#</Parallel>

## USB test section
#<USB>
#NumUSB 2
#RunUSB2Benchmark
#</USB>

## Sound section
#<Sound>
## Maximum distortion allowed before and error is logged, allowed values 1-20
#MaxDistortion 5
## Sound device name to test - plughw, default or other sound alias, should be left as plughw in most cases 
#SoundDevName plughw
#</Sound>

##Plugin tests
##Uncomment 'RunSeparately' and 'IgnoreTimeout' when required and have  <Test> section for each plugin to run (up to 5 )
#<Plugin>

##Run each plugin separately (default will run at the same time)
#RunSeparately

##Ignore no-operations timeout 
#IgnoreTimeout

#<Test>
## Enter the path of the plugin application to run here
#Path /path/to/plugin
## Uncomment 'PreTest' to run as a pre test plugin
#PreTest
#</Test>

#</Plugin>

#<PCIE>
## Automatically select all PCIE slots with PassMark PCIe cards
#TestAllPCIE
##Number of PCIe slots to test
#NumPCIE 1
#</PCIE>


## Errors
<Errors>
## Action to take on error - Continue (Continue), Beep and continue (Beep), Stop tests (Stop)
ActionOnError Continue
</Errors>

## Management Console
#<Management>
##Management console server address eg http://localhost/htdocs/mgtconsolemsghandler.php
#Server http://192.168.2.2/bitconsole/mgtconsolemsghandler.php
## HTTP authentication username
#Username user
## HTTP authentication password
#Password passwd
#</Management>